Control Panel - edenox HC-611 Manual De Instrucciones

The control panel has 3 knobs and 3 leds indicator:
Temperature knob
Time knob
Humidity knob
There are three variables that the user can adjust: temperature, time and humidity. All are affected by the
type of food and the amount entered in the oven.
Temperature it is regulated using the knob, from 50 ° C to 250 ° C. If your appliance is heating by
resistance, the white LED will light next to the knob.
Time it is regulated using the knob, from 0 to 120 minutes, although there is a non-stop mode. which
makes the device work whenever the door is closed (is represented by the symbol of an open hand). If your
appliance is working, amber led located next to this command will turn on.
At the end of the cycle and powering the device, the oven beeps.
The humidity is controlled by injecting water into the turbines, and generating steam to avoid food drying.
It's possible to regulate the value of the humidity between 0 to 100%. This regulation takes continuous moisture
injection cycles, depending on the programmed percentage. For continuous functioning turn the knob to the left
to 100%.

6.2 Control panel

Led temperature indicator
Led switch on/off indicator
Led humidifier indicator
Figure 2
15