Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
POSSIBLE
CAUSE
SOLUTION
1. Bag full
1. Empty the bag.
2. Blocked tube
2. Clear the blockage.
3. Blocked impeller
3. Clear the blockage
Unit will not blow
or suck debris.
4. Dirty bag
4. Clean the bag.
5. Torn bag
5. Replace the bag.
6. Bag unzipped
6. Zip up the bag.
7. Unit unplugged
7. Plug into an outlet or an extension
cord.
1. Check cord to make sure it is plugged into an
1. Unit is unplugged,
electrical outlet.
2. Power/speed
switch is in the
2. Slide switch to high or low.
OFF position.
3. Defective power switch.
3. Call toll free helpline:
1-888-331-4569.
Unit will not start.
4. Vac tubes are not correctly
4. Check vac tubes to ensure that they are allowing
installed,
the switch to be engaged when correctly installed.
5. vacuum gate/port is not closed.
5. Ensure that port/cover
is fully closed an locked.
6. Check wall circuit breaker panel and reset if
6. House circuit may have tripped.
necessary.
13 -- English
Publicidad
Tabla de contenido
