Administrative Settings; Packet Data Settings; Sip Settings; Access Point Name Control - Nokia N97 Manual Del Usuario

Administrative settings

Select Menu Settings
>
settings.
To set the online time for the data call connection,
select Data call. The data call settings affect all access
points that use a GSM data call.

Packet data settings

Select Menu Settings
>
settings Packet
>
The packet data settings affect all access points using
a packet data connection.
Select from the following:
Packet data connection
●
available and you are in a network that supports
packet data, the device registers to the packet data
network. Starting an active packet data connection
(for example, to send and receive e-mail) is quicker
than if the device establishes a packet data
connection when needed. If there is no packet data
coverage, the device periodically tries to establish a
packet data connection. If you select
needed, the device uses a packet data connection
only if you start an application or action that needs
it.
74
and Connectivity
>
and Connectivity
>
data.
— If you select
When
Access point
●
to use your device as a packet data modem to a
Admin. compatible computer.
High speed packet access
●
use of HSDPA (network service) in UMTS networks.

SIP settings

Select Menu
settings
>
Admin.
Session Initiation Protocol (SIP) settings are needed for
certain network services using SIP. You may receive the
settings in a special text message from your service
provider. You can view, delete, or create these setting
profiles in SIP settings.

Access point name control

When
Select Menu
settings
>
With the access point name control service, you can
restrict packet data connections and allow your device
to use only certain packet data access points.
This setting is only available if your SIM card supports
the access point control service.
To turn the control service on or off, or to change the
allowed access points, select
corresponding option. To change the options, you
need your PIN2 code. Contact your service provider for
the code.
— The access point name is needed
— Enable or disable the
Settings and Connectivity
>
SIP settings.
Settings and Connectivity
>
APN control.
Options
Admin.
>
Admin.
>
and the