Bluetooth Telephone - Pioneer MVH-S300BT Manual De Instrucciones

Menu Item Description
A.PAIRING Select [ON] to pair the unit and iPhone or Android device
automatically when an iPhone or Android device is
[ON], [OFF]
connected to the unit via USB. (This function may not be
available depending on the version of iOS you are using.)
• When you are using an Android device, this function is
available in the following situations:
– Your device has Android OS 4.4 or later installed.
– Be sure to turn on the Bluetooth function of the device and
confirm that the device is not connected to the unit via
Bluetooth.
– [P.APP AUTO ON] needs to be set to [ON] (page 21).
– Pioneer ARC APP needs to be installed on your Android
device and [PHONE CONNECT] needs to be set to [APP
CONTROL] (page 16).
– A confirmation button should be pressed on the caution
window displayed on Pioneer ARC APP after a connection
with the Pioneer ARC APP is made.

Bluetooth telephone

First, make a Bluetooth connection with the Bluetooth telephone (page 9). Up
to two Bluetooth telephones can be connected simultaneously.
Important
• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is
not running can drain the vehicle's battery.
• Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1
Press to display the phone menu.
When two phones are connected, a phone name appears first then a phone
menu will display. To switch to another phone, press
2
Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to
confirm.
If you select [PHONE BOOK], proceed to step 4.
3
Turn the M.C. dial to select [MISSED], [DIALED] or [RECEIVED], then press
to confirm.
4
Turn the M.C. dial to select a name or phone number, then press to
confirm.
The phone call starts.
To answer an incoming call
1
Press
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call
while one phone is being used for a call, a message will appear in the display. To answer that
incoming call, you need to end the existing call.
Basic operations
Purpose
End a call
Reject an incoming call
Switch between the current
caller and a caller on hold
Cancel a caller on hold
Adjust the volume of the
caller's voice (When private
mode is on, this function is not
available.)
Turn the private mode on or
off
again.
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (1/
The contact is stored in the selected preset number.
when a call is received.
Operation
Press .
Press and hold
Press the M.C. dial.
Press and hold
Turn the M.C. dial during the call.
Press BAND/
when a call is received.
.
during the call.
to 6/ ).
11
En