Napa CARLYLE 6-1083 Manual De Instrucciones página 2

FAILURE TO OBSERVE THESE WARNINGS COULD RE SULT IN IN JU RY.
It Is the responsIbIlIty of the owner
to make sure all personnel read
thIs manual prIor to usIng the
devIce. It Is also the responsIbIlIty
of the devIce owner to keep thIs
manual Intact and In a convenIent
locatIon for all to see and
read. If the manual or product
labels are lost or not legIble,
contact napa for replacements.
If the operator Is not fluent In
englIsh, the product and safety
InstructIons shall be read and
dIscussed wIth the operator In the
operator's natIve language by the
purchaser/owner or hIs desIgnee,
makIng sure that the operator
comprehends Its contents.
read thIs
InstructIon manual
carefully and
understand all
InformatIon before
operatIng thIs tool.
• Always operate, inspect and maintain
this tool in accordance with American
National Standards Institute Safety
Code of Portable Air Tools (ANSI
B186.1) and any other applicable safety
codes and regulations.
• For safety, top
performance and
maximum durability of
parts, operate this tool
at 90 psig; 6.2 bar max
air pressure with
3/8" diameter air
supply hose.
• Always wear impact-
resistant eye and face
protection users and
bystanders when
operating or performing
maintenance on this
tool.
• Always wear hearing
protection when using
this tool (users and
bystanders). High sound
levels can cause
permanent hearing loss.
Use hearing protection as recommended
by your employer or OSHA regulation.
• Keep the tool in efficient operating
condition.
• Operators and maintenance personnel
must be physically able to handle the
bulk, weight and power of this tool.
• Keep tool out of reach of children.
please revieW all Warning insTrucTions prior To operaTion. save This Man u al for fuTure ref er ence.
6-1083
WARNING
• Air powered tools can
vibrate during use.
Extended exposure to
vibration, repetitive
motions, or
uncomfortable positions
during use may be
harmful to your hands and arms.
Discontinue use of tool if discomfort,
tingling, or pain occurs. Seek medical
advice before resuming use. Repetitive
motions or exposure to vibration may be
harmful to hands or arms.
• Compressed air can
cause severe injury.
Never direct air at
yourself or others.
Always turn off the
air supply, drain hose
of air pressure and
detach tool from air
supply before installing,
removing or adjusting
any part or accessory on
this tool, or before
performing any
maintenance on this
tool. Failure to do so
could result in injury.
Whip hoses can cause
serious injury. Always
check for and replace
any damaged, frayed or loose hoses
and fittings. Do not operate a damaged
or worn tool. Do not use quick-detach
couplings at tool. See instructions for
correct set-up.
• Place the tool on the work before
starting the tool. Do not point or
indulge in any horseplay with this tool.
• Slipping, tripping
and/or falling while
operating air tools can
be a major cause of
serious injury or death.
Be aware of excess hose
left on the walking or work surface.
• Keep body working stance balanced
and firm. Do not overreach when
operating the tool.
• Anticipate and be alert for sudden
changes in motion during use of any
power tool.
• Do not carry tool by
the hose. Protect the
hose from sharp objects
and heat.
• Note direction of
rotation BEFORE
operating this tool.
• Tool shaft may continue to rotate
briefly after throttle is released.
2
Avoid direct contact with accessories
during and after use. Gloves will reduce
the risk of cuts or burns.
• Keep away from
rotating end of tool.
Do not wear jewelry or
loose clothing. Secure
long hair. Scalping can
occur if hair is not kept
away from tool and
accessories. Choking can occur if
neckwear is not kept away from tool
and accessories.
• Do not lubricate tools
with flammable
or volatile liquids such
as kerosene, diesel or
jet fuel.
• Impact wrenches are not torque
control devices. Fasteners with specific
torque requirements must be
checked with suitable torque
measuring devices after installation
with an impact wrench.
• Use only impact sockets and
accessories on this tool. Do not use
hand sockets and accessories.
• Use only impact sockets and
accessories that are recommended
by the manufacturer for your model.
Accessories that may be suitable for
one tool may create a risk of injury
when used on another tool.
• This tool is not insulated
against electric shock.
• This tool must not be
used in explosive
atmospheres.
• Servicing and repairs
should only be made by
an authorized service
center.
• Do not force tool beyond its rated
capacity.
• Do not remove any labels. Replace
damaged labels.
• Use accessories recommended by
NAPA Professional Air Tools.
• This product contains chemicals known
to the State of California to cause
cancer and birth defects or other
reproductive harm. wash hands
thoroughly after handling.
9/16/15