Basic Working Techniques; Throttle Settings Control - Husqvarna 436LiB Manual De Instrucciones

• The blower must not be used while on a ladder or
scaffolding.
• CAUTION! Do not use the machine unless you are
able to call for help in the event of an accident.

Basic working techniques

WARNING! Watch out for thrown objects.
!
Always wear eye protection. Stones,
rubbish, etc. can be thrown up into the
eyes causing blindness or serious injury.
Keep unauthorised persons at a
distance. Children, animals, onlookers
and helpers should be kept outside the
safety zone of 15 m. Stop the machine
immediately if anyone approaches.

Throttle settings control

The speed of the air jet is regulated by means of the
throttle. Select the speed best suited for respective tasks.
• Determine the desired airflow using the throttle.
• Press in the throttle position setting on the keypad.
• Depress the throttle fully to obtain the desired air
speed.
The blower retains the latest throttle position setting in
memory if the machine is shut down or when the battery
is removed from the machine.
WORKING TECHNIQUES
Temporary increase of airflow 'Boost'
A temporary increase in airflow, 'Boost', is used only on
occasions when leaves and trash is stuck or when the
normal airflow is not sufficient. In most cases, normal
airflow is sufficient. An increase in airflow is used mainly
for brief measures.
Press the Boost button on the keypad to temporarily raise
the airflow. Maximum continuous Boost is 5 seconds.
If raised airflow, Boost, is used continuously for longer
than 5 seconds, the airflow will return to its original level.
The activation indicator (LED lamp) for the Boost function
will flash until the Boost function is available again.
–
English 17