Maintenance; Technical Data - Surtek DE513A Manual De Usuario

3. Attach the nylon on the reel (arrow in Fig.10)
and wrap it carefully.
4. Follow the same procedure in step 3 to place
the nylon on the opposite side.
Fig. 10
NOTE: Wrap both sides and let out enough ny-
lon to easily slip them into the holes on the reel
(Fig. 11).
5. Place reel with the renovated nylon in the
head and at the same time accommodate the
nylon lines on the nylon feed holes.
6. Place the reel lid in the head, apply pressure
and make sure it is securely positioned in place.

MAINTENANCE

IMPORTANT: Avoid accidental starting. Dis-
connect the trimmer from the power supply,
keep your feet or other objects that may trig-
ger the switch when cleaning inside the guard
or manually feed nylon.
1. Disconnect the trimmer from the power
source.
2. Never clean your trimmer with water, clean-
ing fluids or solvents, remove the waste with
the appropriate tool, soft brush or dry cloth.
3. Using a brush, clean inside the security guard
and clean the grass or any residue.
4. Using a soft brush, clean inside the security
guard, the blade, the motor housing.
5. Inspect and look trimmer parts misaligned.
6. If the trimmer is damaged, contact an autho-
rized service center.
IMPORTANT: Never use a brush cutter dam-
aged.
7. Store in a clean, fresh out of reach of chil-
dren.
ATTENTION: This trimmer has no parts that
can be repaired by the user, take it to an au-
thorized service center, the disregard of these
instructions could void your warranty.
12

TECHNICAL DATA

VOLTAGE-FREQUENCY
SPEED
CUTTING CAPACITY
NYLON DIAMETER
POWER
POWER CONSUMPTION
WEIGHT
Fig. 11
120 V ~ 60 Hz
10 000 r/min
12" (30,5 cm)
1,4 mm
500 W
0,25 kWh
3,25 kg (7,1 lb)