Parts And Features - Avanti WDT40Q3S-IS Manual De Instrucciones

1. WATER INTAKE
2. HOT / COLD WATER DISPENSER BUTTONS
3. INDICATOR LIGHTS
4. HOT / COLD WATER FAUCETS
5. REMOVABLE DRIP TRAY
6. POWER SWITCHES
RED:
GREEN:
DO NOT TURN ON THE HOT WATER POWER SWITCH BEFORE FILLING THE HOT
WATER TANK WITH WATER. THIS WILL CAUSE THE UNIT TO OVERHEAT AND
SHUTDOWN.
Install the water bottle and allow the tanks to fill with water for approximately 10 – 15
minutes. Before turning on the HOT water power switch.
Your unit is equipped with an AUTOMATIC SAFETY SHUTOFF SWITCH which will turn
the unit off until the hot water tank cools to a safe temperature.
Usual time to reset is approximately 30 – 45 minutes, once the temperature reaches a
safe level, the unit will reset and begin to operate normally.
If the unit has gone into RESET MODE, turn off the hot water power switch ensure there
is water in the tanks and allow the unit to cool down.

PARTS AND FEATURES

HOT WATER
COLD WATER
ATTENTION / WARNING
6