Important Safeguides - Avanti MBD5L Manual De Instrucciones

Dispensador de cerveza (5l)
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Before the Mini Pub is used, it must be properly positioned and installed as
described in this manual, so read the manual carefully. To reduce the risk of fire,
electrical shock or injury when using the Mini Pub, follow basic precaution,
including the following:
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and
do not use an extension cord.
Replace all panels before operating.
Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity of
this or any other appliance. The fumes can create a fire hazard or explosion.
Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected.
Do not connect or disconnect the electric plug when your hands are wet.
Unplug the refrigerator or disconnect power before cleaning or servicing. Failure to do so can
result in electrical shock or death.
Do not attempt to repair or replace any part of your refrigerator unless it is specifically
recommended in this manual. All other servicing should be referred to a qualified technician.
FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
To ensure proper ventilation for your Mini Pub, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 60°F (16
90°F (32°C). This unit must be installed in an area protected from the element, such as wind, rain,
water spray or drips.
The Mini Pub should not be located next to ovens, grills or other sources of high heat.
The Mini Pub must be installed with all electrical connections in accordance with state and local
codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in accordance with
the National Electrical Code and local codes and ordinances is required.
Do not kink or pinch the power supply cord of the Mini Pub.
The fuse (or circuit breaker) size should be 15 amperes.
It is important for the Mini Pub to be leveled in order to work properly. You may need to make
several adjustments to level it.
Make certain that the hoses are not pinched or kinked or damaged during installations.
Check for leaks after connection.
Never allow children to operate, play with or crawl inside the Mini Pub.
Do not use solvent-based cleaning agents of abrasives on the interior. These cleaners may
damage or discolor the interior.
Do not use this appliance for other than its intended purpose.

IMPORTANT SAFEGUIDES

4
°
C) and below

Publicidad

Tabla de contenido
loading

Tabla de contenido