Operating Your Appliance; Control Panel Description - Avanti WIMD332PC-IS Manual De Instrucciones

 OPERATING YOUR ICE MAKER
 Control Panel Description
Display
ADD WATER
Water level in reservoir is not sufficient to begin the ice making cycle.
Using the water cup included with the unit, fill the water reservoir up to the line
marked "MAX".
ICE MAKING CYCLE STATUS
When the fan is rotating this means the unit is currently in the ice making cycle.
When the fan is stopped this mean the unit is not currently making ice.
If there is an "S" at the top right corner of the fan symbol, this means the small sized
ice cubes has been selected.
If there is an "L" at the bottom right corner of the fan symbol, this means the large
sized ice cubes has been selected.
DISPENSING ICE
The unit will show this icon while dispensing ice.
ICE BIN IS FULL
After you dispensed or removed the ice, unit will restart automatically.
Button
Press this button to select the small sized ice cubes
This is the DEFAULT setting.
Press this button to select the large sized ice cubes.
Press this button to dispense cold water.
Press this button to turn the unit ON / OFF or to reset the ice making cycle.
Ice Size Selector
The size selection will stay as selected unless changed or there is a power failure.
For the most efficient operation when ambient temperature is below 15°C (59ºF) use the small
cube size setting.
Meanings and How to operate
Operation
9