ASSEMBLY
HARNESS ADJUSTMENT
A well adjusted backpack blower and harness makes work easier. Adjust the harness to give you
the best working stance. Adjust the side straps so the weight is equally distributed across your
shoulders.
A
Once the blower is properly fitted on your back, pull the ends of the straps downward to
A
tighten the harness. Connect the horizontal chest strap, and pull the end of the strap to
tighten.
B
B Lift the tabs of the adjusters to loosen the straps.
C
C Close and lock the quick-release fastener by pushing it together.
D Squeeze the hooks to open the quick-release fastener.
HARNESS REMOVAL
• Open the quick-release fasteners on both chest strap and waist strap. (See Fig D.)
• Loosen the harness straps by lifting the sliding adjusters and then take off the blower. (See Fig B.)
W A R N I N G
The backpack blower must be quickly removed in the event of imminent danger. The chest and
waist strap must be released before putting the backpack blower on the ground.
D
14