General Instructions; Cleaning And Maintenance - Stokke SLEEPI Serie Instrucciones De Uso

READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF PRODUCT.
US/CA
KEEP INSTRUCTIONS FOR FUTURE USE.

General Instructions

• Read these instructions carefully and follow them in detail to ensure that
the safety features of the bassinet and crib are not compromised. Keep these
instructions for later use. Save the Allen key for later use. Re-tighten all screws
2-3 weeks after assembly.
• When assembling the bassinet or crib do not tighten the screws until the whole
unit is assembled. Doing this ensures you the easiest way to assemble.
• Make sure the bassinet or crib is placed on a level and stable surface. After
assembly, check and tighten all fittings and screws. Loose screw connections
or parts could lead to the baby trapping a body part, or clothing (e.g. strings,
necklaces, ribbons for babies' dummies, etc.) which would pose a risk of
strangulation.
• Make sure there are no loose parts in the bassinet or crib which a child could
swallow, as this could lead to suffocation or choking. Make sure there are no
loose parts in the crib that could provide a foothold for
• your child.
• Never place the bassinet or crib by an open fire or source of strong heat such as
electric bar fires, gas fires, etc. due to the risk of fire.
Right of complaint and Extended Warranty
Applicable worldwide in respect of the Stokke® Sleepi™, hereinafter
referred to as the product.
RIGHT OF COMPLAINT
The customer has a right of complaint pursuant to the consumer protection legislation
applicable at any given time, which legislation may vary from country to country.
Generally speaking, STOKKE AS does not grant any additional rights over and above
those laid down by the legislation applicable at any given time, although reference is
made to the "Extended Warranty" described below. The rights of the customer under
the consumer protection legislation applicable at any given time are additional to those
under the "Extended Warranty", and are not affected thereby.
STOKKE® "EXTENDED WARRANTY"
However, STOKKE AS, Parkgata 6, N-6003 Ålesund, Norway, grants an "Extended
Warranty" to customers who register their product in our Warranty Database. This
may be done via our webpage www.stokkewarranty.com. Upon registration, a
warranty certificate will be issued and sent to the customer electronically (e-mail)
or by ordinary mail.
80
• Do not use the bassinet or crib if any parts are damaged or missing.
• Place the bassinet or crib in reasonable distance from curtains, blinds, heaters
and power points.
• To ensure a safe environment for the child, check regularly, before placing the child
in the bassinet or crib, that every component is properly and securely in place.
Information about your new mattress
Compressed mattresses regain their original shape after 72-96 hours
Polyurethane-foam has a distinctive odour which may linger a few days after
unpacking. The odour will disappear. Airing and vacuuming the mattress will
help to eliminate the odour.
The foam reacts to he ultraviolet light from the sun and the oxygen from the air
and will turn yellow with time.
The mattress is compliant with EN 16890:2017.
INSTRUCTIONS FOR USE: Hold the zipper end with one hand. As the zipper puller
is sewn on inside, use the other hand to open the zipper from mesh side.
Registration in the Warranty Database entitles the owner to an "Extended Warranty"
as follows:
• 7-year warranty against any manufacturing defect in the product.
The "Extended Warranty" also applies if the product has been received as a gift or
purchased second-hand. Consequently, the "Extended Warranty" may be invoked by
whoever is the owner of the product any given time, within the warranty period, and
subject to the warranty certificate being presented by the owner.
The STOKKE® "Extended Warranty" is conditional upon the following:
• Normal use.
• The product only having been used for the purpose for which the product is intended.
• The product having undergone ordinary maintenance, as described in the
maintenance/instruction manual.
• Upon the "Extended Warranty" being invoked, the warranty certificate shall be
presented, together with the original date-stamped purchase receipt. This also
applies to any secondary or subsequent owner.
• The product appearing in its original state, hereunder that the only parts used

CLEANING AND MAINTENANCE

STOKKE Mattress*)
• Ticking: Washable at 60°C (140°F). Stretch while wet. Do not
tumble dry.
• Foam: Can be heat treated in 100°C (212°F) and washed/flushed
in boiling water. After a pee accident, the mattress should always
be washed; pee is excellent growth media for fungi.
• Wood: Wipe with a clean damp cloth, wipe off excess of water.
We do not recommend any use of detergent. Colours may change
if they are exposed to the sun.
• Normal use: Always remove the bedlinen in the morning and let
the bed and bedlinen "cool down" and dry up.
*) Not valid for other manufacturers. See own care-instructions.
have been supplied by STOKKE® and are intended for use on, or together with, the
product. Any deviations herefrom require the prior written consent of STOKKE®.
• The serial number of the product not having been destroyed or removed.
The STOKKE® "Extended Warranty" does not cover:
• Issues caused by normal developments in the parts making up the product (e.g.
colouration changes, as well as wear and tear).
• Issues caused by minor variations in materials (e.g. colour differences between parts).
• Issues caused by extreme influence from external factors like sun/light, temperature,
humidity, environmental pollution, etc.
• Damage caused by accidents/mishaps – for example any other objects having
bumped into the product or any person having overturned the product by colliding
with it. The same applies if the product has been overloaded, for example in terms
of the weight placed on it.
• Damage inflicted on the product by external influence, for example when the
product is being shipped as luggage.
• Consequential damage, for example damage inflicted on any persons and/or
any other objects.
Stokke Sleepi user guide
® ™
• If the product has been fitted with any accessories that have not been supplied by
Stokke, the "Extended Warranty" shall lapse.
• The "Extended Warranty" shall not apply to any accessories that have been purchased
or supplied together with the product, or at a subsequent date.
STOKKE® will under the "Extended Warranty":
• Replace or – if STOKKE® thus prefers – repair the defective part, or the product
in its entirety (if necessary), provided that the product is delivered to a reseller.
• Cover normal transport costs for any replacement part/product from STOKKE® to
the reseller from whom the product was purchased. – No travel costs on the part
of the purchaser are covered under the terms of the warranty.
• Reserve the right to replace, at the time of the warranty being invoked, defect parts
by parts that are of approximately the same design.
• Reserve the right to supply a replacement product in cases where the relevant
product is no longer being manufactured at the time of the warranty being invoked.
Such product shall be of corresponding quality and value.
How to invoke the "Extended Warranty":
Generally speaking, all requests relating to the "Extended Warranty" shall be made
to the reseller from whom the product was purchased. Such request shall be made as
soon as possible after any defect has been discovered, and shall be accompanied by
the warranty certificate as well as the original purchase receipt.
Documentation/evidence confirming the manufacturing defect shall be presented,
normally by way of the product being brought along to the reseller, or otherwise
being presented to the reseller or a STOKKE® sales representative for inspection.
The defect will be remedied in accordance with the above provisions if the reseller
or a STOKKE® sales representative determines that the damage is caused by a
manufacturing defect.