Squeegee Installation; Solution Tank Filling - Nilfisk-Advance SC401 Instrucciones De Uso

Available brushes and their relevant application guides (suggestions only)
Models
General cleaning:
Concrete
Terrazzo floor
Ceramic tiles/quarrystones
Marble
Vinyl tiles
Rubber tiles
Polishing:
Rubber tiles
Marble
Vinyl tiles

Squeegee installation

1. Install the squeegee (A, Fig. 3) and fasten it to the bracket
(C) with the handwheels (B).
2. If necessary, adjust the squeegee with the knob (D) so that
the rear blade (E) and front blade (F) touch the floor as
shown in the figure.

Solution tank filling

CAUTION!
Use only low-foam and non-flammable
detergents, intended for automatic scrubber
applications.
WARNING!
When using floor cleaning detergents, follow
the instructions on the labels of the detergent
bottles.
To handle floor cleaning detergents, wear
suitable gloves and protections.
NOTE
If the machine is equipped with Detergent System
pour clean water in the tank, otherwise pour solution.
1. Ensure that the solution valve (28) is open (28-B).
2. To fill the solution tank (21) lift the plug (22) and use the
removable filler hose (23) or the "garden" intake (24).
09/2017
46 GRIT 80 GRIT 180 GRIT
INSTRUCTIONS FOR USE
240 GRIT 500 GRIT PROLENE
F
Figure 3
9100002290 - SC401
ENGLISH
PROLITE UNION MIX
C
A
B
D
B
E
P100951
13