Setting The Controls - Danby DERM240WC Manual Del Propietário

OPERATING INSTRUCTIONS
SURFACE COOKING CONTROLS
The surface heating elements of the appliance are
designed for a variety of heat settings.
At both the HI and LO positions, there are slight
indents and the knob will click into place in these
positions. HI indicates the highest setting. LO
indicates the lowest setting.
A sound of clicking may be heard from the
appliance during use. This is normal and indicates
that the heat setting selected is being maintained.
Changing to a higher heat setting will happen faster
than changing to a lower heat setting as it will take
time for the heat to dissipate.

SETTING THE CONTROLS

1. Push the control knob in.
2. Turn to the desired heat setting.
The knob only needs to be pushed in when moving
out of the "OFF" position. When the knob is in any
position other than "OFF", it can be turned without
pushing in.
Ensure that the element is turned off when cooking
is fi nished. An indicator light will glow when any
heating element is turned on.
HEAT SETTING GUIDE
• HI - quick start for cooking; bringing water to a
boil
• MEDIUM HIGH - Fast fry; pan broil; maintain a
fast boil on a large amount of food
• MED - Sauté and brown; maintain a slow boil
on a large amount of food
• MEDIUM LOW - Cereal; maintain the serving
temperature of most foods
• LO - Cook after starting at HI; cook with little
water in a covered pan; use to steam rice; melt
chocolate or butter
Never leave food unattended while cooking. Boil
overs cause smoking. Greasy spill overs may catch
fi re.
Note that the icon above the knob indicates which
burner the knob controls.
MAX
8
MIN