Chapter 5 Faq - AD Instruments AD9330 Manual De Usuario

___________________________________________________________________________
1. No input or output signals
• Make sure if there is power in
• Make sure the equipment connection is correct
• Make sure the cable is no problem
• Make sure there is signal output among the equipment
2. The network management can not be connected
. Check the network setting is correct between equipment and PC.
. Make sure the lan is connected
. If the connection is under the LAN, the reticle should be connected
to equipment after the equipment in normal working, then it can be
connected the software of network management.
NOTE: If the above steps still can not solve the problem or there comes
out other problem, please contact the supplier or the technology
department.
©Copyright Abacanto Digital SA.

Chapter 5 FAQ

Manual de usuario AD9330
AD Instruments
13