Shooting Format Adjustment (S.ZOom) - Metz MECABLITZ 50 AF-1 digital Manual De Instrucciones

Setting procedure
• actuate the shutter release in order to transfer data from the flash unit to the
camera.
REAR
OFF
OFF
• the required settings can be applied using
REAR
On
On
The setting takes effect immediately.
After about 5 seconds the display stops flashing and the setting is saved auto-
matically. „REAR" is shown in the display following activation of the second
curtain synchronisation.
Second curtain synchronisation cannot be activated when the flash unit is
set to high-speed synchronisation FP or HSS (see 7.3).
104
REAR
• repeatedly press button combi-
nation „Select" until only
„REAR" appears flashing in the
display.
the + and — buttons.
REAR
– when„REAR On" is displayed
the second curtain synchronisa-
tion is activated (REAR-mode).
– when„REAR Off" is displayed the
second curtain synchronisation
is deactivated.
9.9 Shooting format adjustment (S Zoom)
The display for the position of the main reflector for digital cameras is adapted
to the chip format (dimensions of image component) using the zoom size
function („S Zoom").
Setting procedure
• actuate the shutter release in order to transfer data from the flash unit
to the camera.
• repeatedly press button combination
„Select" until „Zoom" appears in the
display and „S" flashes.
• the required settings can be applied using
the + and — buttons.
– when „S On" is displayed the
Zoom-Size function is activated.
– when „S Off" is displayed the
Zoom-Size function is deactivated.
The setting takes effect immediately.
After about 5 seconds the display stops flashing and the setting is saved auto-
matically. „S" is shown in the display following activation of the
Zoom-Size function.
S
OFF
S
On
On
S