Bissell 2215 SERIE Manual De Instrucciones página 6

PowerBrush Switch
WARNING
Before using your vacuum, make sure that the dirt container is in locked position and
that all filters, both pre and post-filters are in place. DO NOT operate your vacuum without
these filters.
1
Power
On/O
Switch
Turn vacuum on by pressing Power
Switch on (I - ON and O - OFF).
NOTE: The brush roll will automatically shut off when vacuum is locked in upright
position, recline to reactivate.
NOTE: Turn the Brush Roll OFF when vacuuming hard or delicate surfaces that
may be caught by the rotating brush. This could include hard wood, tiled floors,
small area rugs or frieze carpets that have long delicate fibers or threads.
Adjusting the Variable Suction
1
Locate the Variable Suction Control Valve
on the Hose Wand Base.
NOTE: The vacuum will come with the Variable Suction Valve closed for full
suction power.
6
www.BISSELL.com
2
Press the Brush Roll switch to run the
PowerBrush for carpet cleaning (brush roll
is on when light on switch is illuminated).
2
Brush Roll
On/O
suction control
Twist Valve - Marker
moves to indicate
FULL
Decrease the amount
suction level
of suction for cleaning
delicate carpets,
curtains, rugs, or
if difficult to push/
pull by twisting the
variable suction valve
counterclockwise.
Switch
REDUCED