Philips HR2505 Manual Del Usuario página 5

20. Always ensure the appliance is turned off after each use. Always unplug the
appliance from the electrical outlet when not in use, before putting on or taking
off parts, before touching parts that move and before cleaning or attempting to
move the appliance.
21. Never leave the appliance unattended while in use.
22. Always place the appliance on a stable, level and horizontal surface.
23. Do not use the appliance outdoors or in moving vehicles or boats. Misuse may
cause injury.
24. Avoid contact with moving parts.
25. Make sure all parts are assembled properly before you switch on the appliance.
Do not disassemble while the appliance is operating.
26. Do not exceed the suggested quantities and running time specified in the user
manual or run the motor continuously.
27. Do not process more than one batch without interruption
(maximum 3 minutes). Let the appliance cool down completely before
continuing to process.
28. Keep hands, fingers, and utensils away from the cutting blade while chopping
food to reduce the risk of severe injury to persons or damage to the food
chopper. A scraper may be used but only when the food chopper is not
running.
29. Blade is sharp. Handle carefully.
30. To reduce the risk of injury, never place cutting blade on base without first
putting bowl properly in place.
31. Be certain cover is securely locked in place before operating appliance.
32. Do not attempt to defeat the cover interlock mechanism.
SAVE THESE INSTRUCTIONS
IMPORTANT
- Vibration may occur while operating the appliance. This is normal. Make sure
the appliance is always operated on a stable, flat surface.
- If a significant amount of juice or fluid spills onto, around or under the
appliance while operating, turn the appliance off, and unplug from outlet. Then
clean and dry the appliance before continuing to use.
- This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit into a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not attempt to modify
the plug in any way.
ENGLISH
7