Entering Character Codes With Numeric Keys On The Keyboard - Sharp XE-A212 Manual De Instrucciones

A212_3 FOR THE MANAGER
To program the word "Clerk01" with the letter "C" being double size.
To make the letter "C" double size character
To make character size return to normal size
To toggle the characters to lower-case letters

Entering character codes with numeric keys on the keyboard

To enter a numeral, letter or symbol, enter a character code using numeric keys and press the numeric key
For the character codes, please refer to the alphanumeric character code table on the next page. Be doing this,
you can program characters other than those on the key tops.
• Double-size characters can be made by entering the character code 253 or pressing the
displayed when double-size characters entry is selected as shown in the operator display example below.
• All three digits of the character code MUST be entered (even if it starts with zero).
Operator display (Example)
Cursor
Press of
:
01
253 065
Department code, PLU code, function number,
clerk code or logo message line number is displayed here.
Characters entered are displayed here.
To program the word "SHARP" in double-size characters
253
32
03.7.5 8:02 AM Page 32
PGM
W 065
Character code
: : :
083 072 065
S H
Wg
W
H
hijk01
Characters: Indicating double size character of "A"
=A
Press of
:
01
: : :
082 080
A R P
=C PGM
01 W 02
=C PGM
01 02
=C PGM
01 a 02
=Clerk01 PGM
01 a 08
:
W
key. "W" is
PGM
W 02
Number of characters
programmed
.