Thermal Printer Density; Language Selection; Ej Memory Type - Sharp XE-A212 Manual De Instrucciones

A212_3 FOR THE MANAGER

Thermal printer density

s
* 50 (100%) is the default setting. To make the print darker, set a larger number, and to make the print lighter,
set a smaller number.
Key operation example

Language selection

s
*Language: 0: English
By default, English is set.
Key operation example
When you change the language, the texts such as clerk names, logo messages and function texts
(refer to page 45), which you programmed, will be reset to the default settings. The language
selection must be made before programming clerk names, logo messages and function texts.

EJ memory type

When this procedure is executed, EJ data is cleared, and PLU data (programming data and sales
data) are reset to the default after all data is cleared even if the same memory type is selected.
*A: 0 for EJ 8000 lines and PLU 1200 codes
1 for EJ 9000 lines and PLU 210 codes (default)
Key operation example
03.7.5 8:02 AM Page 57
@
50
s @
50
s A
70
@
88
1: German 2: French
s @
88
A
1
s @
90
s @
90
A
0
To set "0"
* s
Printer density
(00-99)
Print
To set "0"
A
*Language
(0-3)
3: Spanish
Print
A
*A
Print
A
57