Placing The Speakers; Using As 2Ch Stereo Speakers; Using As Front Speakers In A Multi Channel System - Yamaha NS-B951 Manual De Instrucciones

The grille is detached from the speaker and packed
separately. Be careful not to lose it.
Place the speakers on a sturdy, vibration-free surface, or on a
well-built stand.
■

Using as 2ch stereo speakers

Better stereo images will be obtained when the speakers are
slightly angled in towards the listeners.
■
Using as front speakers in a multi
channel system
Position the speakers on both sides of the TV. The positioning
of speakers is important, because it controls the whole sound
quality of a multi channel system. Set up the speakers on the
basis of your listening position by following the owner's
manual supplied with your amplifier.
Speaker layout image
NS-B951
Center
Note
Placing the speakers too close to a CRT-type TV may
impair the picture color or cause a buzzing noise. In this
case, move the speakers at least 20 cm (8") away from the
TV. This is not an issue with LCD and plasma TVs.

PLACING THE SPEAKERS

Subwoofer
Surround
Yamaha speaker stand SPS-900 (option)
You can use this unit as a floor stand speaker when
installing on an SPS-900.
In this case, use screw holes on the bottom of this unit.
• For details about installing, refer to the assembly
instruction of SPS-900.
Bottom view
(Front side)
Screw holes
135 mm (5-3/8")
Notes
• To avoid accidents resulting from tripping over loose
speaker cables, fix them to the floor.
• Do not fasten the speaker on the stand with nails or
adhesives, etc. Long time use and vibrations may
cause this unit to fall down.
• Do not pinch the cables between the speaker and the
stand.
Diameter: 4 mm (1/8")
Hole depth: 13 mm (1/2")
Yamaha speaker
stand SPS-900
2
En