Yamaha PDM-4220 Manual Del Usuario página 29

OPERATING INSTRUCTIONS (continued)
SETUP MENU (TV mode) (continued)
Selected characters
Auto Tuning
Country
Search
Manual Tuning
Position
Search
(C--)
(S--)
(--MHz)
Descrambler
Name
Sound System
Colour System
Skip
NR
Fine Tuning
Sort
(A Line of position List)
Teletext Language
Auto Off
28
(Page1) (Page2)
–
1 2 3
••••••
–
–
–
–
Off
( :a letter)
L L'
DK
Auto PAL
NTSC3.58
Off
Off
Decreasing the frequency Incresing the frequency data
data for the main tuner for the mian tuner
–
–
Off
Select the country name by
press OK button.
(Page3)
• If some required stations could not be preset in this auto tuning
function, select and preset the required station in the required
position by the manual tuning operation.
–
Press the OK button and it starts the auto tuning.
Set the position number(1~199 and AV00) or channel number by
199 AV00
(+) (–) CHANNEL UP/DOWN button.
At first, select the channel entry method, entering a two digit
–
channel number(CH), entering a two digit S-band number or
entering a three digit frequency(MHz), by pressing the OK button.
Enter two digit number by pressing 0~9 NUMBER buttons. If the
–
number is normal, then it starts the channel search.
Enter two digit number by pressing 0~9 NUMBER buttons. If the
–
number is normal, then it starts the channel search.
Enter three digit number by pressing 0~9 NUMBER buttons. If the
–
number is normal, then it starts the channel search.
Set this to Off normally. If it is set to On, AV1 (Scart) terminal
On
operates as TV signal output, and the screen changes to display
AV1 (Scart) input signal automatically.
This is used to input the name of the TV station within 5 letters.
After fixing the cursor on the first digit, select a letter by
SELECT buttons and move to next digit by
Press the OK button again after finished.
• Selectable letters are "0"~"9", "A"~"Z", "+", "–", " "(blank),
","(comma) and "."(period) .
BG
Select the sound system through the 5 different settings.
I
SECAM
Select the colour system through the 5 different settings.
NTSC4.43
If this is set to On, that position will be skipped whilst selecting
On positions by PROGRAM UP/DOWN button.
This is automatically set to On for those non-broadcasting
channels.
If this is set to On, it helps to reduce the noise interference visible
On
on the screen, especially in the weaker signal reception areas.
After completing the fine-tuning, press the RETURN button to exit
this mode.
• The variable range is -56 ~ +56.
Press OK button at the line that is required to change order, then
the characters will change to green. And move it up or down in
–
the list by pressing
button to complete it. Press the RETURN button to exit.
Select the teletext language, depending on the area utilized
through the 4 settings: West Europe, East Europe, Cyrillic, and
–
Greek/Turkish.
If this is set to On, the power will be turned off when there is no
On
transmission signal and no operation for about 10 minutes in the
TV mode.
Setup hint
and SELECT buttons and
ADJUST button.
and SELECT buttons. And press OK
and