Storing And Recalling Stations; Switching The Display; Using Itunes Tagging; Function Settings - Pioneer DEH-P6200BT Manual De Instrucciones

Operating this unit
Preset tuning
1 Push M.C. up or down.
Seeking
1 Push and hold M.C. left or right.
You can cancel seek tuning by pushing M.C. left
or right.
While pushing and holding M.C. left or right, you
can skip stations. Seek tuning starts as soon as
you release M.C.

Storing and recalling stations

You can easily store up to six stations for each
band as presets.
Using preset tuning buttons
1 When you find a station that you want to store in
memory, press one of the preset tuning buttons
(1 to 6) and hold until the preset number stops
flashing.
2 Press one of the preset tuning buttons (1 to 6) to
select the desired station.
Using the preset screen
1 Press
to switch to the preset screen.
2 Use M.C. to store the selected frequency in the
memory.
Turn to change the preset number. Press and
hold to store.
3 Use M.C. to select the desired station.
Turn to change the station. Press to select.

Switching the display

Selecting the desired text information
1 Press
/DISP/SCRL.
Program service name—song title—artist name
Scrolling the text information to the left
1 Press and hold
/DISP/SCRL.

Using iTunes tagging

This function can be operated with the following
iPod models.
— iPod 5th generation
— iPod nano 3rd generation
— iPod nano 4th generation
— iPod classic
— iPod classic 120GB
— iPod touch
— iPod touch 2nd generation
— iPhone
— iPhone 3G
However, tag information can be stored in this
unit even while other iPod models are used.
The song information (tag) can be saved from
the broadcasting station to your iPod. The
songs will show up in a playlist called "Tagged
playlist" in iTunes the next time you sync your
iPod. Then you can directly buy the songs you
want from the iTunes Music Store.
Storing the tag information to this unit
1 Tune in to the broadcast station.
2 Press and hold M.C. if
while the desired song is broadcasting.
Storing the tagged information to your iPod
1 Connect the iPod to this unit and transfer this
unit's tag information to the iPod.

Function settings

1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
BSM (best stations memory)
BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
1 Press M.C. to turn BSM on.
! To cancel, press M.C. again.
Section
appears in the display
11
En
02