Sony HT-RT5 Manual De Instrucciones página 15

Tips
• You can enable or disable the reception of
AAC or LDAC audio from the BLUETOOTH
device (page 27).
• You can also switch the [Bluetooth Mode]
using RX/TX on the remote control.
When the BLUETOOTH device in step 5 has
finished pairing and that is the most
recently connected device, you can connect
it to the system automatically by simply
pressing RX/TX on the remote control. In
this case, you do not need to perform step
6.
To disconnect the BLUETOOTH
receiver
Perform any of the following items.
– Disable the BLUETOOTH function on the
BLUETOOTH receiver.
– Set [Bluetooth Mode] to [Receiver] or
[Off] (page 27).
– Turn off the system or the BLUETOOTH
receiver.
– Select the device name of the
connected BLUETOOTH receiver from
the [Device List] in [Bluetooth Settings].
To delete a registered BLUETOOTH
receiver from the device list
1
Follow steps 1 to 6 of "Listening to
Sound by Transmitting to a
BLUETOOTH-compatible Receiver."
2
Select the device name, and then
press OPTIONS.
3
Select [Remove], and then press
4
Follow the on-screen instructions to
delete the desired BLUETOOTH
device from the device list.
.
15
US