Cleaning And Servicing; Нtorage; Troubleshooting - Bosch MUM5 Serie Instrucciones De Uso

Ocultar thumbs Ver también para MUM5 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 124
After using the appliance
Нсitch off the appliance сith the rotarу
sсitch.
Rotate the blender in a clockсise
direction and remove.
Tip: It is recommended to clean the blender
immediatelу after use.

Cleaning and servicing

Attention!
Do not use abrasive cleaning agents.
Нurfaces maу be damaged.
Cleaning the base unit
Risk of electric shock!
Never immerse the base unit in сater
or place under running сater.
Do not use a steam cleaner.
Remove mains plug.
Сipe the base unit and drive cover сith
a damp cloth. If reлuired, use a little
detergent.
Then drу the base unit.
Cleaning the boсl and tools
The boсl and tools are dishсasher-proof.
Do not сedge plastic parts in the dishсasher,
as theу could be permanentlу deformed
during the сashing process!
Cleaning the continuous-feed shredder
All parts of the continuous-feed shredder are
dishсasher-proof.
Tip: To remove the red film after processing
e.g. carrots, pour a little cooking oil on a cloth
and rub the film off the continuous-feed
shredder (not the cutting discs). Then rinse
the continuous-feed shredder.
Cleaning the blender
Risk of injurу from sharp blades!
Do not touch blender blades сith bare
hands.
The blender jug, lid and funnel are
dishсasher-proof.
Robert Bosch Hausgeräte GmbH
Tip: After processing liлuids, it is often
sufficient to clean the blender сithout
removing it from the appliance. Pour a little
сater and сashing-up liлuid into the attached
blender. Нсitch on the blender for several
seconds (setting З). Pour out the сater and
rinse out the blender сith clear сater.
Important information
If reлuired, clean accessories bag.
Аolloс care instructions in the bag.
Нtorage
Risk of injurу!
Сhen the appliance is not in use, pull out
the mains plug.
Аig. 
Нtore tools and cutting discs in the
accessories bag.
Еeep accessories bag in the boсl.
To store in the original packaging,
see Аig. .

Troubleshooting

Risk of injurу!
Before eliminating a fault, pull out the
mains plug.
Important information for ЗПЗ54../
ЗПЗ55../ЗПЗ56..
The Operating indicator flashes if the
appliance has been operated incorrectlу
or the electronic fuse has tripped or the
appliance is defective.
The sсivel arm must be engaged in everу
operating position.
Initiallу trу to eliminate the problem сhich has
occurred сith the help of the folloсing
information.
Аault
Appliance does not start.
Remedial action
Check the poсer supplу.
Check the mains plug.
en
23

Publicidad

Tabla de contenido
loading

Tabla de contenido