When Installing The Dome Camera To The Electrical Box - JVC TK-C205 Instrucciones

Mounting
holes
5.
Horizontal
Lock screw
Screws
6.

When installing the Dome camera to the electrical box

The camera can be mounted directly onto an electrical box.
1.
2.
4inch square electrical box
Mounting
holes
5.
Screws
5.
Point the camera in the direction you
wish to capture.
Point the camera so that the Horizontal
Lock screw is facing the direction you wish
to capture. The camera can be adjusted
±60° horizontally to either side of the
Mounting
Horizontal Lock screw.
holes
6.
Mount the camera to the ceiling.
Use M4 screws/bolts or wood screws
(φ4.1mm) to secure the camera in four
places when mounting to the ceiling or wall.
Tighten all screws securely. Otherwise the
camera may come loose and fall.
1.
Open a hole in the ceiling.
Open a φ140mm hole in the ceiling.
2.
Mount the electrical box.
The camera can be mounted on a
4-inch square electrical box.
For instructions on mounting the
electrical box, ask your dealer.
3.
Follow steps 2 to 3 of "Mounting the
Camera to the Ceiling (Preparations)".
(
4.
Follow steps 1 to 6 of "Mounting the
Camera to the Ceiling (Installation)".
(
5.
Mount the camera to the electrical
box.
Secure the camera to the electrical box
using two mounting holes.
Mounting
holes
Tighten all screws properly. Otherwise the
camera may come loose and fall.
CAUTION:
page 11)
page 12)
CAUTION:
E-13