Names And Operations Of Parts; Body Surface - JVC TK-C205 Instrucciones

Introduction

Names and Operations of Parts

Body Surface

View when the dome cover is removed.
For instructions on removing the dome cover, see step 4 of "Mounting the Camera to the
Ceiling". ( page 11)
1
2
3
Head
1
For adjusting the lens, focus, or camera
angle.
( page 14 ~ 15)
2 [IRIS LEVEL] Iris level adjustment
For adjusting the level of the automatic
aperture control lens. This adjustment
only needs to be made when required.
Use this to accommodate particular
shooting conditions.
To darken image Counterclockwise (L side)
To brighten image Clockwise (H side)
MEMO
• When adjusting the iris level, set the
AGC switch to "OFF". Otherwise, when
the level is turned too far toward L, the
AGC function activates increasing
sensitivity and the picture may look
uneven.
E-6
Turning direction of level
MONITOR terminal (RCA pin)
3
For connecting a monitor when mount-
ing the camera for adjusting the lens or
determining the camera angle. (High im-
pedance)
[D/N - ON/OFF] Easy Day & Night
4
switch
To capture a subject with continually
changing brightness (day/night), set this
switch to "ON." The camera automatically
captures the image in color when the
subject is bright, and in black and white
mode when it is dark.
(Default setting: OFF)
CAUTION
The Easy Day & Night feature on this cam-
era uses a sensitized black and white
mode unlike other black and white surveil-
lance cameras that use infra-red lighting.
5 [FOCUS ADJ. - ON/OFF] focus
adjustment switch
When adjusting the focus during
installation, setting this switch to "ON" will
open the iris.
(Default setting: OFF)
( page 15)
4
5
6
7
8
9
10
11
12
13