Dismantling The Etude Bed - Invacare Etude Medley Manual Del Usuario

Fitting the mattress support extension
Disassemble the bed and remove the inserts. Mount the mattress support extension and the two mattress support
parts, and reassemble the bed (see illustration 2a in the front of the users manual).
Choice of mattress
The standard mattress size for Etude bed is 90x200 cm. We recommend a mattress density
of at least 35 kg/m³.
When the mattress support is positioned in the upper hinge position, a mattress of up to 12 cm
(standard steel or wooden side rail).
When the mattress support is positioned in the lower hinge position, a mattress of up to 18 cm
(standard steel or wooden side rail).
Metal side rails with extra height can be offered as an accessory, thus making mattress heights of
up to 22 cm for Etude Medley possible.
Mattress heights (cm)
Bed
Type of siderail
Upper mattress support
hinge position
Lower mattress support
hinge position

8. Dismantling the Etude bed

• Remove side rails and lifting pole.
• Bring the bed to its lowest position and adjust all mattress support sections
to horizontal position.
• Disconnect the mains cord (or the external power supply) from the socket outlet,
and roll the cord onto the cable hook at the head end of the bed.
• Remove the locking cam from the control unit, by means of a flat bladed
screwdriwer.
• Pull out the cables for all motors.
• Remove the mattress support from the bed ends.
• Disassemble the mattress support.
Etude Medley
Wooden siderail Metal siderail
10 - 12
10 - 18
20
10 - 12
10 - 18