Flash Time (Recall) - Amplicomms PowerTel 92 Manual De Instrucciones

P
HONE SETTINGS
Note: For dialling a telephone number using the direct dialling feature plea-
se refer to page 70.
Grip the cover between your thumb and index finger and
remove it as shown in the diagram. Insert the required
picture or photograph (20 x 25 mm) under the cover and
replace it back on the button.

Flash time (Recall)

You can set the length of the flash signal using the slide switch on the
bottom of the telephone (300 ms – 100 ms).
The flash function is activated by pressing the
Flash time -
72
In most situations the flash time of 100 ms should be
selected. In some cases, e. g. when connecting the
phone to a PABX, it may be necessary to switch to 300
ms. For further information please refer to the user
guide of the PABX.
Helpline UK 0844 800 6503
(See page 77 for costs and hours of operation)
button, see also page 73.