Connecting The Telephone - Amplicomms PowerTel 92 Manual De Instrucciones

G
ETTING STARTED
Important:
• Use only the telephone cable supplied with your telephone otherwise
your phone may not work.

Connecting the telephone

First connect the telephone receiver to the base unit. Take one end of the spiral
cable and plug it into the socket at the bottom of the receiver. Plug the other
end of the spiral cable into the socket on the side of the phone.
Connect the telephone cable supplied to the telephone socket and the jack on
the bottom side of the telephone. Feed the cable through the respective cable
channel.
If you want to use the telephone as a table
unit, mount the table support on the
bottom side of the device. The notch of the
table support is located above the upper wall
mounting facility (see figure).
Make sure that all four of the locking hooks
are correctly locked in place.
64
Helpline UK 0844 800 6503
(See page 77 for costs and hours of operation)