Brandt BFU662LNW Guia De Instalacion página 35

7
IMPORTANT! Before starting
to work, adjust their height by
turning the outer legs 10 and
the inner legs 11 (pic. 2). When
legs are turned clockwise, the
front of the appliance is raised,
when anti-clockwise,
lowered. Make sure that both
appliances are stable.
Connecting the appliances
Start connecting the appliances at the back.
1. Separate one appliance from the other,
leaving a gap of 7 mm in-between.
2. Unscrew the screws 12 at top of the
backside of the appliances (pic. 3).
3. Screw back plate 6 at the back of the
appliances (pic. 3). Screw the screws 12
back in.
4. Attach back plate 6 using self-tapping
bolts 9 (from the bag) where the
designated holes are located (pic. 3).
Carefully push the two appliances into
5.
their intended place. We recommend
doing this with someone's help, slightly
tilting the appliances backwards
◄
back plates 6 (Qty: 2);
8
it is
.
7
9
◄
bolts 7 (Qty: 2);
self-tapping bolts 8 (Qty: 4);
self-tapping bolts 9 (Qty: 2);
(in the bag inside the freezer).