Function Parameters For - Sharp XE-A303 Manual De Instrucciones

Function parameters for

*1:Item:
A Footer printing*
B Amount tendered entry*
C Entry digit limit
Footer printing
• This programming decides whether or not the machine should print a message at the foot of a receipt when
A
the key is used. With regard to programming method of footer logo message, refer to "Logo
messages" section on page 25.
Amount tendered entry
• You may select amount tendered, compulsory or optional.
Entry digit limit
• Program upper limit entry for total cash amount which can be handled on the register. The entry digit limit is
in effect for REG mode operation but can be overridden in the MGR mode. The entry digit limit is represented
by the number of allowable digits for the maximum entry or total amount. When "0" is set, the operation of the
corresponding key is prohibited.
Key operation example
A
To program 0 for all items
@
1
* ABC
To program for another key
@
018
s A
1 2
Part Part
s A
Selection:
Allow
Disallow*
Compulsory
Non-compulsory*
Print
3
FOR THE MANAGER
Part
Entry:
1
0
1
0
0-8 (default:8)
From left, ABC
63