BH HIPOWER sportkoncept G930 Instrucciones De Montaje página 50

SK
LINE
sportkoncept
4) SELF OR ELECTRICALLY POWERED.-
With the word "Power" flashing, press the ENTER key and the word ON or OFF will start flashing. Select the
option that is flashing by using the LEVEL UP and LEVEL DOWN keys.
The ON option is used to keep the monitor on at all times. If the ON option is selected it will be necessary
to ensure that the machine is plugged into the mains supply by means of the adapter. When you have
selected an option press the ENTER key to confirm and the word "POWER" will start flashing again. Stop
exercising.
If you wish to switch the monitor off with this option, press and hold the STOP key until you hear a beep.
Wait 45 seconds and the unit will switch over to the OFF option.
With the OFF option, the machine is self powered, which means that the monitor will come on as soon as
you start exercising. Once you have selected this option press the ENTER key and the word "POWER" will
start flashing. Use the LEVEL UP key to pass on to the (5 SWR time) setting on the adjoining bottom screen.
With the OFF option selected the monitor will switch itself off 45 seconds after you have finished exercising.
If you wish to exit the personalisation mode press the STOP key.
5) STEADY WATT RATE TIME (SWR TIME, Mod; H800; H890).-
With the word "SWR time" flashing, press the ENTER key and a figure between 0 and 60 seconds will start
flashing. Select the flashing value using the LEVEL▲ and LEVEL▼ keys and then press ENTER to confirm,
the word "SWR time" will start flashing again, using the LEVEL▲ key , pass on to the (6 SPR time) setting on
the adjoining bottom screen. If you wish to exit the personalisation mode press the STOP key.
6) STEADY PULSE RATE TIME.-
With the word "SPR time" flashing, press the ENTER key and a figure between 20 and 60 seconds will start
flashing. Select the flashing value using the LEVEL▲ and LEVEL▼ keys and then press ENTER to confirm,
the word "SPR time" will start flashing again, using the LEVEL▲ key , pass on to the (7 MANUAL T) setting
on the adjoining bottom screen. If you wish to exit the personalisation mode press the STOP key.
7) MAX. EXERCISE TIME.-
With the word "MANUAL T" flashing, press the ENTER key and a figure between 0 and 60 minutes will start
flashing. Select the flashing value using the LEVEL▲ and LEVEL▼ keys and then press ENTER to confirm,
the word "MANUAL T" will start flashing again, using the LEVEL▲ key , pass on to the (8 TEXT) setting on
the adjoining bottom screen. If you wish to exit the personalisation mode press the STOP key.
8) CHANGING THE WELCOME MESSAGE.-
With the word "TEXT" flashing, press the ENTER key and the word ON or OFF will start flashing. Select the
option that is flashing by using the LEVEL▲ and LEVEL▼ keys Choosing the ON option allows you to change
the monitor's welcome message.
Once the ON option has been selected, press the ENTER key and a flashing cursor will appear on the
alphanumeric screen (B). Use the LEVEL▲ and LEVEL▼ keys to enter a welcome message letter by letter.
Once you have finished entering the message, press the ENTER key for a few seconds and the word
"TEXT" will start flashing. Use the LEVEL▲ key to pass on to the (9 SOUNDS) setting on the adjoining
bottom screen. If you wish to exit the personalisation mode press the STOP key.
9) CHANGING THE SOUND.-
With the word "SOUNDS" flashing, press the ENTER key and the word ON or OFF will start flashing. Select
the flashing value using the LEVEL▲ and LEVEL▼ keys and then press ENTER to confirm, the word
"SOUNDS" will start flashing again.
Press the STOP key to exit the personalisation mode and the manual program will be displayed on the LED
array (A).
Begin exercising and you will see that the changes have been made.
15