Engine Oil Replacement - TOHATSU MFS 5C LPG Manual Del Propietário

Ocultar thumbs Ver también para MFS 5C LPG:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

50
INSPECTION AND MAINTENANCE
Description
Throttle cable
Shift/
Throttle
Shift link
Warning system
Stop switch
Bolt, nut
Sliding part / rotating part
Grease nipples
Outer equipment
Anode
Top cowl / Latch
*" " This procedure can be performed by end user (or dealer)
*" " This procedure shall be carried out by the dealer.
ENON00030-0
Note
Your outboard motor should receive careful, and complete inspection at 300 hours. This is the
best time for major maintenance procedures to be carried out.
ENOM00091-A

Engine oil replacement

ENOW00091-0
You may be injured due to high engine tem-
peratures if you fill engine oil just after stop-
ping. Changing engine oil should be done
10
after the engine has been cooled.
ENOW00092-A
Do not overfill engine oil, or engine oil
could leak and/or engine could be dam-
aged. If engine oil level is over upper limit
marks of oil gauge, drain oil to level lower
than upper limit.
Be sure that outboard motor is in upright
and level position when che cking or
changing oil.
Stop engine immediately if low oil pres-
sure warning lamp is lit or oil leak is found,
Inspection intervals
Every
Every
First 20
50
100
hours
hours
hours
of 1
of 3
of 6
month
months
months
/
CAUTION
CAUTION
Every
Every
200
400
Inspection procedure
hours
hours
of 1
of 2
year
year
Check and replace if necessary
Check and adjustment
Check
Check
Retighten
Apply grease
Pump in grease
Check
Check /Replace if necessary
/
Check / Adjustment
or engine could be severely damaged.
Consult dealer.
Wipe off engine oil well immediately if
spilled and dispose of it in accordance
with local fire prevention and environ-
ment protection regulations.
ENOW00090-0
Use of engine oils that do not meet these
requirements will result in reduced engine
life, and other engine problems.
ENOW00933-0
Engine oil mixed with dust or water will dra-
matically shorten the life of the engine.
To change engine oil:
Be sure to use recommended engine oil
(see page 13).
1. Stop the engine and allow it to cool.
Remarks
Refer to P33
Refer to P57
Refer to P57
Refer to P56
CAUTION
CAUTION

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido