Troubleshooting; Scrapping The Machine - Tennant S8 Manual De Uso Y Recambios

6.2 -TROUBLESHOOTING

FAULT
The belt is broken
The reduction gear
The main brush
has burnt out
is not spinning
A wire is detached
The side brush
The belt is broken
is not spinning
The liquid is
insufficient
The battery
(for lead acid
does not stay
battery)
charged
The terminal is
loose
The filter is broken
The filter is in the
Dust comes
wrong position
out of the fan
The gaskets are
worn
The brushes
The brushes are
wear out too
too low
quickly
The flaps are worn
Dust given off
while the
machine is in
Clogged filter
operation
The motor has
The vacuum
burnt out
motor does not
The wire is
work
disconnected
The battery
terminals are
The machine
disconnected
does not come
on
The battery is
discharged
In case of other malfunctions, contact the Authori-
NOTE
zed Service Center
CAUSE REMEDY
Replace
Contact service
center
Contact service
center
Replace
Top up
Tighten
Replace
Position correctly
Replace
Adjust
Replace
Clean
Contact service
center
Contact service
center
Check
Recharge

6.3 -SCRAPPING THE MACHINE

In the event the machine must be scrapped, please remember that
batteries are not common waste materials. They must be disposed
of in accordance with the relevant laws.
The machine is composed of different parts. Dismantle it and pre-
pare the waste for disposal in accordance to their type.
DO NOT USE THE SCRAP PIECES AS SPARE PARTS. KEEP
SCRAPS OUT OF REACH OF CHILDREN.
- 17 -