Using The Easy Demagnetization Function; Automatic Power Saving Function - Esoteric E-02 Manual Del Usuario

Using the easy demagnetization function

Using the easy demagnetization function to demagnetize MC car-
tridges with iron cores and step-up transformers, for example, could
improve the sound quality by making it clearer and giving it greater
definition.
1
Use the INPUT knob to select the input source
that has the cartridge connected you want to
demagnetize.
2
Press the DEMAG button to turn on easy
demagnetization.
The indicator to the left of the button lights when easy demag-
netization is on.
This sets the load impedance to 0 Ω and shorts both ends of the
cartridge.
3
Play a record.
The playback signal current goes through the cartridge and
demagnetizes it.
o Demagnetization takes about 30 seconds. Keep the record
playing for about 30 seconds.
o No playback sound is output when in DEMAG position.
4
Press the DEMAG button to turn off easy
demagnetization.
Confirm that the indicator to the left of the button is no longer lit.

Automatic power saving function

The automatic power saving function is on by default when the unit
is shipped new from the factory. When this function is on, the unit
will automatically turn off if 30 minutes pass without sound input.
You can check the automatic power saving setting by looking at the
input source indicators immediately after turning the unit on.
No indicators lit: Automatic power saving function on
All indicators lit: Automatic power saving function off
To turn the automatic power saving function on or off, press and hold
the MONO button while turning the unit on.
11