1. INTRODUCTION
Thank you for choosing a Powersine DC to AC inverter as your power source. The Powersine
inverter series are one of the most sophisticated inverters available today. With high
reliability, efficiency and sine quality as our most important design goals, the Powersine
inverter series is developed to serve you with safe and trouble free operation for years.
Your Powersine inverter features an advanced micro processor control system with a
MOSFET power stage and a low loss toroidal transformer. This toroidal transformer in
combination with well over dimensioned power components, ensures a very reliable
operation, so that extreme overload conditions, like startup of compressors or pumps, can
be handled safely.
To get optimal feedback from your inverter while operating, a build in diagnosis system will
warn you optically by different flash sequences, depending on the error situation. See the
troubleshooting chapter for the flash sequence table. Also, the inverter will warn you
acoustically before it's going to shut down in a low battery, overload or high temperature
condition (except PS200-xx models).
To get optimal performance and safe operation from your inverter, it must be installed and
used properly. Please read this manual very carefully, especially the warning and caution
statements, before installing and using your Powersine inverter.
2. INSTALLATION
2.1
Placement of the inverter
1. Ceiling mounting
2. Floor mounting
3. Vertical wall mounting, fan at bottom : OK (beware of small objects falling through
4. Vertical wall mounting, fan on top
5. Horizontal wall mounting
: Not recommended
: OK
the ventilation openings on top)
: Not recommended
: OK
6