JVC KD-AVX1 Manual De Instrucciones página 43

Ocultar thumbs Ver también para KD-AVX1:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Indications
Sirius ID*
1
SIRIUS
®
ID
EXT INPUT*
4
External input
Beep
Rear SPK*
5
Rear speaker output
Telephone
Telephone muting
Amp Gain
Amplifier gain control
AV INPUT
Audio-Video input
*
4
Cannot be selected if the source is "CD-CH" or "EXT-IN".
*
Functions only when Dual Zone is activated (see page 37).
5
*
6
Reverse gear signal connection is needed to change the monitor view automatically. See
Installation/Connection Manual (separate volume).
Selectable settings, [reference page]
The 12-digit SIRIUS identification number appears on the monitor,
[50].
CHANGER: [Initial]; To use a JVC CD changer and/or SIRIUS
radio (JVC DLP), [46, 50].
EXT IN:
To use any external component other than above, [49].
You can deactivate the key-touch tone if you do not want it to beep
each time you press a button.
On:
[Initial]; Activates the key-touch tone.
Off:
Cancels.
On:
[Initial]; Select this to turn on the rear speaker output.
Off:
Cancels.
Muting1/Muting2: Select either one which mutes the sounds while
using the cellular phone.
Off:
[Initial]; Cancels.
You can change the maximum volume level of this receiver.
High Power: [Initial]; VOL 00 – VOL 50
Low Power: VOL 00 – VOL 30 (Select this if the maximum power
of the speaker is less than 50 W to prevent them from
damaging the speaker.)
Off:
Deactivates the built-in amplifier.
You can determine the use of LINE IN and VIDEO IN jacks on this
receiver.
Audio+Video: [Initial]; Select this when connecting an AV
component such as a VCR.
Audio:
Select this when connecting an audio component
such as a cassette deck.
6
Camera*
:
Select this when connecting the rear view camera.
The rear view through the camera is automatically
displayed on the monitor when you change the gear
to the back position.
Camera Rev.*
6
: The mirror image of the rear view through the
rear view camera is automatically displayed on
the monitor when you change the gear to the back
position. (The monitor on the unit only; the normal
rear view appears on the external monitor.)
43

Publicidad

Tabla de contenido
loading

Tabla de contenido