Using the Bluetooth audio player
• Operations and display indications differ depending on their availability on the connected audio player.
4 ¢:
Touch: Reverse/forward skip
Hold: Reverse/forward search
5 ∞:
Selects group/folder.
6:
Starts playback.
BAND:
Pauses playback.
☞
A Sound mode (
page 50)
☞
B
page 32
C Status of the device
*
Signal strength/Battery remainder
D Track no./Playing time
E Indicates the touched control or pressed button. It may be
different from the operation status.
F Track title/Artist Name/Album title
* Appears only when the information comes from the
device.
~
Select "Bluetooth."
Ÿ
Start playback.
• See pages 31 and 32 for connecting a new device.
• See page 32 for connecting/disconnecting a
registered device.
• See page 33 for deleting a registered device.
• When the sound is stopped or interrupted during the
use of a Bluetooth device, turn off, then turn on the
unit.
– If the sound is not yet restored, connect the device
again. (☞ "Connecting/disconnecting a registered
device" on page 32)
Bluetooth
FLAT
Current Track Title
Artist Name
Album Title
Selecting playback modes
You can use Repeat or Random playback mode.
1
Enter
<AV Menu>
2
Select <Repeat> or <Random>.
3
Select a playback mode.
Repeat:
Random: Off: Cancels.
When one of the playback modes is selected, the
corresponding indicator lights up on the source
information screen.
To cancel, select <Off> in step 3.
You can use the following buttons on the remote
controller for the Bluetooth audio operations. For
details, ☞ pages 10 and 11.
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit the following JVC web site: <http://
www.jvc-victor.co.jp/english/car/>
37
3
01 0:02:39
= <Mode>.
Off: Cancels.
Track: Repeats current track.
Group: Repeats all tracks of the
current group/folder.
All: Repeats all tracks.
Group: Randomly plays all tracks of
current group/folder, then tracks of
next groups/folders.
All: Randomly plays all tracks.
OPERATIONS