Password [Print]; Password Set-Up - Reiner jetStamp 790 Manual De Instrucciones

jetStamp 790/790 MP

3.13. Password [PRINT]

Blocks access to stamping with a password and protects it against misuse.
The factory-set password is 2468.
Proceed as in menu access (see page 49).
Press [NEXT] until "PASSW PRINT" appears.
f
Press [VARY].
f
To activate the password input, press [ON].
f
Password input is active.
To modify the password, press [RETURN] once
f
(see "Password Set-up", page 77).
– or –
In order to deactivate password input, enter the defined password.
f
To confirm the password, press [RETURN] once.
f
Password input can now be deactivated.
To deactivate password input, press [OFF].
f
To save changes and to return to the main menu,
f
press [RETURN] three times.
The main menu appears.

3.14. Password Set-up

Proceed as in menu access (see page 49).
Setting one of the passwords to [ON].
f
Press [RETURN].
f
To increase the number value, press [INC].
f
To decrease the number value, press [DEC].
f
To move one character to the right and to change it with [INC/DEC], press [RIGHT].
f
To save changes and to return to the main menu,
f
press [RETURN] three times.
The main menu appears.
GB
77