Version; System Reset; Communication Setup - Yamaha BD-S1065 Manual De Instrucciones

Settings

■ Version

When you select "Version", the system software version is
displayed.

■ System Reset

You can reset all settings to the factory presets.
Reset, Not Reset

■ Communication Setup

This allows you to perform and/or change the
communication setting. This setting is required to use BD-
LIVE functions that connect to the internet.
Notes
– Make sure that the LAN cable is connected to this
Player. (See page 14.)
– For manually performing the setting, the following
information of the connected router or modem is
required. Confirm the information prior to the
setting.
– IP address, netmask, gateway, DNS IP address
– Besides, if specifying a proxy server, the following
information specified from your internet service
provider is also required. Confirm the information
prior to the setting.
– IP address and port number of the proxy server
TOP MENU/TITLE LIST
EXIT
ON SCREEN
SETUP
1 Press SETUP to display the Setup Menu screen.
2 Press
/ / /
ENTER.
3 Press
/ to select "Communication Setup", then
press ENTER.
4 Select "Ethernet Setup (BD-LIVE)", then press
ENTER.
34
En
POP UP MENU
ENTER
RETURN
SEARCH
P in P REPEAT OFF
to select "Settings", then press
5 Press
/ to select "Change", then press ENTER.
Current Ethernet setup info.
IP Address : Auto Setup
Netmask : Auto Setup
Gateway : Auto Setup
DNS : Auto Setup
Proxy : Not Use
Change
– For initializing the current setting, select "Initialize",
then press ENTER.
6 For setting the IP address, press
or "No", then press ENTER.
Do you obtain the IP address
automatically?
Yes
IP Address
Netmask
Gateway
– If selecting "Yes": The IP address is automatically
obtained.
– If selecting "No": The IP address, netmask and
gateway are manually entered using the screen for
inputting characters. (See page 36.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
7 Select "Next", then press ENTER.
8 For setting the DNS IP address, enter the primary and
secondary IP addresses using the screen for inputting
characters. (See page 36.)
Regarding each of the setup values, confirm the
specifications of your broadband router.
9 Select "Next", then press ENTER.
0 For setting the proxy server, press
"Yes" or "No", then press ENTER.
Do you use the proxy server?
Yes
Address
Port
– If selecting "Yes": The IP address or proxy server
name and port number for the proxy server specified
from your internet service provider are entered using
the screen for inputting characters. (See page 36.)
– If selecting "No": Go to the next step.
A Select "Next", then press ENTER.
B For the advanced setting (the setting of the Ethernet
connection speeds), press
"No", then press ENTER.
– Normally select "No", then press ENTER.
Initialize
/ to select "Yes"
No
Next
/ to select
No
Next
/ to select "Yes" or