Troubleshooting Guide; Warranty - Belle Group Minitile 180 Manual Del Operador

HAVE YOUR MACHINE REPAIRED BY A QUALIFIED PERSON ONLY
This electric machine complies with the relevant safety rules. Repairs should only be carried out by qualifi ed persons using original
spare parts, otherwise this may result in considerable danger to the user.
Fault
The machine does not
function.
If lubrication does not
arrive at the blade with the
pump running.
Motor gives off unpleasant Water may have seeped through inside
odour.
Machine is diffi cult to start. Motor bearings are damaged.
Your new Belle Group Tile Saw is warranted to the original purchaser for a period of one-year (12 months) from the original date of
purchase. The Belle Group warranty is against defects in design, materials an workmanship.
The following are not covered under the Belle Group warranty:
1. Damage caused by abuse, misuse, dropping or other similar damage caused by or as a result of failure to follow assembly,
operation or user maintenance instructions.
2. Alterations, additions or repairs carried out by persons other than Belle Group or their recognised agents.
3. Transportation or shipment costs to and from Belle Group or their recognised agents, for repair or assessment against a warranty
claim, on any machine.
4. Materials and/or labour costs to renew, repair or replace components due to fair wear and tear.
The following components are not covered by warranty:
• Drive belt(s)
• Engine air fi lter
• Engine spark plug
Belle Group and/or their recognised agents, directors, employees or insurers will not be held liable for consequential or other damages,
losses or expenses in connection with or by reason of or the inability to use the machine for any purpose.
Warranty Claims
All warranty claims should fi rstly be directed to Belle Group, either by telephone, by Fax, by Email, or in writing.
For warranty claims:
Belle Group Warranty Department,
Unit 5, Bode Business Park
Ball Haye Green
Leek
Staffordshire
ST13 6BW.
England.
Tel : +44 (0)1538 380000
Fax : +44 (0)1538 380038
Email : warranty@belle-group.co.uk

Troubleshooting Guide

Cause
The power supply cable is damaged or
not properly connected.
No voltage in the socket.
Switch is damaged.
Diamond blade is bent due to
incorrect use.
The sprayer unit is clogged.
the motor.
Capacitor is damaged.
Remedy
Press the plug fi rmly into the power socket.
Have the socket checked.
Consult local dealer.
Replace diamond blade.
Dismantle the sprayer assembled inside the blade cover
and remove any possible residuals.
Unplug the power supply cable and consult local dealer.
Unplug the power supply cable and consult local dealer.
Consult local dealer.

Warranty

11
GB
GB