General Safety - Belle Group Minitile 180 Manual Del Operador

GB
WARNING
Keep your work area perfectly clean
- Cluttered areas invite injuries.
Consider work area environment
- Don't expose tools to rain.
- Don't use tools in damp or wet locations. Keep work area well lit.
- Don't use tools in presence of fl ammable liquids or gases.
Guard against electric shocks
- Prevent body contact with grounded surfaces.
Keep children away!
- Do not let third parties contact tool or extension cord. All visitors should be kept away from work area.
Store your tools in a safe place
- When not in use, tools should be stored in dry and save places, out of the reach of children.
Don't force tool
- It will function better and in a safer way at the rate for which it was intended.
Use the right tool
- Don't use low duty tools or accessories to do the job of a heavy-duty tools. Don't use tools for purposes not intended.
Dress properly
- Rubber gloves and non-slip footwear are recommended when working outdoors. Wear protective hair covering to contain long hair.
- Use safety glasses.
- Use a mask if working operations are dusty.
Don't abuse cord
- Never carry tool by cord or yank it to disconnect it from socket.
- Keep cord from heat, oil and sharp edges.
Avoid unsteady positions
- Be sure to work in a safe and balanced position.
Maintain tools with care
- Keep tools sharp and clean for better and safer performance.
- Follow all maintenance advice and instructions to replace accessories subject to wear. Inspect tool cords periodically and, if
damaged, have them repaired by an authorised expert. Check extension cords periodically and replace them if damaged.
- Keep handles dry, clean and free from oil and grease.
Disconnect tools
- When not in use, before servicing, and when changing accessories subject to wear.
Remove service keys from tool
- Form the habit of checking to see that keys and adjusting spanners are removed from tool before turning it on.
Avoid unintentional starting
- Be sure that the switch is off when plugging in the tool.
Extension cords for outdoor works
- When tool is used outdoors, use only extension cords intended for this particular use and so marked.
Stay alert
- Watch what you are doing. Use common sense. Do not operate tool when you are inattentive.
Check tool for damaged parts
- Before further use of the tool, check it and the safety devices for damages and be sure that they operate properly. Check for
functioning and binding of moving parts, breakage of parts, correct mounting, and any other conditions that may affect the
correct operation of the tool.
- Damaged safety devices or other parts should be properly repaired or replaced by an authorised Service Centre unless otherwise
indicated elsewhere in this instruction manual.
- Have defective switches replaced by an authorised Service Centre.
- Do not use tool if its switch cannot be turned on or off.
Warning
- For your personal safety use only accessories recommended in this instruction manual or in the relevant catalogues The use of
any other accessory or attachment other than those recommended in this instruction manual or in the relevant catalogue may
present a risk of personal injury.
Have tools repaired by qualifi ed personnel
- This electric appliance is in accordance with the safety rules in force. Only qualifi ed experts may carry out repairing of electric
appliances otherwise it may cause considerable danger for the user.

General Safety

When using electric tools, following safety precautions should always be followed to reduce the risk
of fi re, electric shock and personal injuries. Read and follow all these instructions before attempting to
operate this product.
6