Din Rear-Mount; Removing The Unit; Securing The Front Panel; Speaker Installation - Pioneer DXT-2266UB Manual De Instrucciones

Installation

DIN Rear-mount

1 Determine the appropriate position
where the holes on the bracket and the
side of the unit match.
2 Tighten two screws on each side.
1
2
1 Mounting sleeve
2 Mounting bracket
3 Dashboard or console
Use either truss (5 mm × 8 mm) or flush sur-
face (5 mm × 9 mm) screws, depending on
the bracket screw holes.

Removing the unit

1 Remove the trim ring.
1
1 Trim ring
! Releasing the front panel allows easier ac-
cess to the trim ring.
! When reattaching the trim ring, point the
side with the groove down.
2 Insert the supplied extraction keys into
both sides of the unit until they click into
place.
3

Securing the front panel

The front panel can be secured with the sup-
3
plied screw.
1 Screw

Speaker installation

1 45°
2 4.3 mm holes (3/16 in. Dia.)
3 f 142 mm (5-5/8 in. Dia.)
Pull the unit out of the dashboard.
1
2
Section
03
1
1
3
Front
13
En