Rec Off Timer - Teac LPR550USB Manual Del Usuario

This unit can record from the radio or other equipment connected
to the unit by setting the end recording time with the REC OFF
timer .
The REC OFF timer function does not work when the unit records
from PHONO or TAPE .
1 Press the PHONO/TAPE/AUX button or the FM/AM button
to select the source to be recorded.
To record an external source connected to the AUX IN jacks,
select AUX .
2 Load a recordable CD-R or CD-RW disc into the unit.
Make sure "NO TOC" and "CD-R" (or "CD-RW)" indicators light on
the display, or the RECORD button will not work .
< Before recording, tune in the radio station, Select a track-number-
assignment mode setting, set the recording level and prepare the
external source connected to the AUX IN jack .
3 Press the RECORD button to set the unit to record pause
mode.
The red indicator on the RECORD button blinks and J appears
on the display .
30

REC OFF Timer

< No button will work while "bUSY" is displayed . Wait about 10
seconds until "bUSY" disappears from the display .
4 Press the RECORD button again.
"OFF" and the recording time (minutes/seconds) will be
displayed .
5 Press the . m or , / button to set the end
recording time.
Each time the button is pressed, the display will move up (down)
by 5 minutes .
< The time set will be memorized and will be displayed the next
time you will use this function . To change the recording time,
follow the steps
< The recording time can be set up to the maximum recordable
time of the disc . When the disc has less than 5 minutes of
recordable time, the recording time will be regulated by the
remaining time .
Example: CD-RW with a recordable time of "74 minutes"
Press the skip buttons (.m/,/) to set the time at
5-minute intervals up to 74 minutes .
6 Press the PLAY/PAUSE button (y/J) to start recording.
When recording starts, recording time starts decreasing .
Recording will stop when the time reaches to "00:00" .
< When recording is finished, the recording timer will be cancelled .
< You can use the PLAY/PAUSE button (y/J) and the TRACK
INCREMENT button during the timer recording .
< Press the STOP button (H) to stop recording .
< Each time you press the DISPLAY button, the display cycles
through the remaining time of recording, remaining recordable
time of the disc, and the recording source .
recording time
1 5
to .
10:00 ......... 70:00
(5-minute intervals)
5:00 74:00