Cameo ZENIT P 40 Manual De Usuario página 17

AUTO MODE (Programme 1 – Programme 6)
The 6 different auto-programmes each comprise non-editable colour-change sequences. Brightness and speed are independently adjustable. Select
auto mode as described above under CONFIGURE STANDALONE MODE and confirm with ENTER. Now use UP and DOWN to select one of the 6 auto
programmes (observe arrow) and confirm with ENTER. To adjust brightness, use UP and DOWN to select the menu item "Dim" and confirm with
ENTER, then use UP and DOWN to select the desired value between 000 and 255. Confirm with ENTER. Set the run speed by selecting the menu item
"Speed", confirm with ENTER, then select the desired value between 001 and 100. Confirm with ENTER. Press MODE four times to return to the main
display (Mode Auto).
--------------- Mode ---------------
Auto
Color Macro
Static
Tunable White
User Color
COLOUR MACROS (Color Macro)
15 different preset colour macros are available. Select "Color Macro" as described above under CONFIGURE STANDALONE MODE and confirm with
ENTER. Now use UP and DOWN to select the desired colour preset (observe arrow) and confirm with ENTER (Color Off = blackout). A three-digit
figure is shown on the display and you can set the desired brightness on a scale from 000 to 1000 using UP and DOWN. Confirm with ENTER. Press
MODE three times to return to the main display (Color Macro Mode).
---------------- Mode ----------------
Auto
Color Macro
Static
Tunable White
User Color
STATIC MODE (Static)
Static mode allows the functions Dimmer, Strobe and R, G, B, W to be adjusted directly on the device with values between 000 and 255, in a similar
way to with a DMX controller. In this way, an individual scene can be created without an additional DMX controller. Select static mode as described
above under CONFIGURE STANDALONE MODE and confirm with ENTER. Now use UP and DOWN to select the menu item you wish to edit (observe
arrow) and confirm with ENTER. The display will show a three-digit number field and you can use UP and DOWN to configure the desired value
between 000 and 255. Confirm with ENTER. Press MODE three times to return to the main display (Static Mode).
---------------- Mode ----------------
Auto
Color Macro
Static
Tunable White
User Color
COLOUR TEMPERATURE (Tunable White)
Colour temperature mode enables the light to be configured with a colour temperature of cold white to warm white (CTC) and allows brightness
(Dim) to be adjusted directly on the device. Select colour temperature mode as described above under CONFIGURE STANDALONE MODE and confirm
with ENTER. Now use UP and DOWN to select the menu item you wish to edit (observe arrow) and confirm with ENTER. The display will show a
three-digit number field and you can use UP and DOWN to configure the desired value. Confirm with ENTER. Press MODE three times to return to the
main display (Tunable White Mode).
---------------- Mode ----------------
Auto
Color Macro
Static
Tunable White
User Color
---------------- Auto ----------------
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
------------ Color Macro ------------
Color Off
Red <100>
Amber <100>
Yellow Warm <100>
Yellow <100>
Green <100>
Turqoise <100>
Cyan <100>
---------------- Static ----------------
Dimmer <255>
Strobe <255>
Red <255>
Green <255>
Blue <255>
White <255>
------------- Program x -------------
Dim <100>
CTC <255>
Dim CTC
000 000
- -
100 255
------------- Program x -------------
Dim <255>
Speed <100>
Dim Speed
000 001
- -
255 100
Blue <100>
Lavender <100>
Mauve <100>
Magenta <100>
Pink <100>
Warm White <100>
White <100>
Cold White <100>
000
Mode
-
Static
255
Mode
Tunable White
Mode
Auto
000
Mode
-
Color Macro
100
17