Publicidad
Idiomas disponibles
Idiomas disponibles
en
Operation
Intended use
Use the RE7T-C1 Solo727 charger to charge
RE7T-B1 Solo770 batteries.
The RE7T-C1 Solo727 charger should be connected to
DC 12 V.
The charger can also be operated at an
AC 110/120...220/240 V mains voltage with mains cables
from the RE7T Solo461 heat detector tester kit.
NOTICE
Unintended use of charger
Damage to charger or battery
· Only use charger in dry rooms.
· The charger heats up during operation. Ensure
sufficient ventilation during operation. Do not
cover charger.
· Only charge RE7T-B1 Solo770-type batteries.
RE7T-B1 Solo770 batteries and mains cables are
not included in the charger's scope of delivery.
2
Building Technologies
Fire Safety
Charging battery at DC 12 V
Connect the charger's (1) connector (3) to a Solo770
1.
rechargeable battery (4).
Connect the cable (5) to a socket for DC 12 V; e.g., a
2.
cigarette lighter socket in a vehicle.
The LED (6) on the charger (1) lights up red.
It takes around 1 hour to charge.
When the battery (4) is fully charged, the LED (6) lights up
green.
NOTICE
Overheating of devices
Damage to charger or battery
· Do not leave charger connected to a fully charged
battery if power to the charger could be
repeatedly disrupted.
NOTICE
No compatibility between chargers
Solo727 chargers only charge Solo770 batteries.
Solo726 chargers only charge Solo760 batteries.
Charging battery at AC 110/120...220/240 V (only possible
with a separate mains cable)
Connect the charger's (1) connector (3) to a Solo770
1.
rechargeable battery (4).
Connect the mains cable (2) to the charger (1) and a
2.
socket for AC 110/120...220/240 V.
The LED (6) on the charger (1) lights up red.
ð
It takes around 1 hour to charge.
When the battery (4) is fully charged, the LED (6) lights up
green.
A6V11432110_----_a
2018-05-31
Publicidad
