Removing A Jammed Laminating Pouch; Cleaning - EASYHOME OL 250-Q125 Manual Del Usuario

USA

Cleaning

The heating rollers will automatically pull the laminating pouch in and move
it to the laminating pouch output slot
use force to pull out the laminating pouch.
4. Remove the laminating pouch and let it cool off briefly on a flat surface.
• If necessary, you can cut off excessive material after it has
cooled off.
• Repeat the process if the laminating pouch has not adequately
adhered to the document.
5. Move the ON/OFF switch to "OFF" (

Removing a jammed laminating pouch

The laminator is equipped with an antiblocking system. If the laminating pouch
was not inserted straight or it becomes jammed in the laminator, proceed as
follows:
1. Move the ABS switch
hold it down.
2. Pull the laminating pouch
It is recommended you pull the laminating pouch out in the direc-
tion of its larger end.
You can place the document in a new laminating pouch and laminate it again.
Cleaning
WARNING!
Burn hazard!
The laminator will become hot during operation.
− Always let the laminator cool off completely before you
clean it.
14
www.monolith-support.com
) to switch the laminator off.
AAAAA
7 towards the laminating pouch infeed slot
out of the laminator.
6
5 on the front of the laminator. Don't
Laminator
2 and
AFTER SALES SUPPORT
1 877-386-8264
USA