Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation:
Reverse the removal procedure.
Insert the front axle shaft through the
wheel hub and left fork leg.
Make sure that the lug ( ) on the fork
leg is located in the slot ( ) on the
speedometer gearbox.
Tighten the front axle nut to the
specified torque:
44 N·m (4.5 kgf·m , 33 lbf·ft)
After installing the wheel, apply the brake
several times and then check if the wheel
rotates freely. Recheck the wheel if the
brake drags or if the wheel does not
rotate freely.
78
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
7
braking capacity.
6
(6) Slot
(7) Lug
(6)
(7)
Publicidad
Tabla de contenido
