Important Safeguards - Apex iCH Auto Manual De Uso

Ocultar thumbs Ver también para iCH Auto:

Manual de instrucciones (89 páginas)

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

Contenido

189

Tabla de contenido

Idiomas disponibles

iCH Auto/English

WARNING –

THIS DEVICE IS NOT INTENDED FOR LIFE SUPPORT. It may stop operating due to power

interruption without hazard to patient.

If oxygen is used with the device, the oxygen flow must be turned off when the device is not in use.

Explanation of the Warning: When the device is not in operation and the oxygen flow is left on,

oxygen delivered into the tubing may accumulate within the device and create a risk of fire.

Oxygen is inflammable. Oxygen should not be used while smoking or in the presence of an open

flame.

Always ensure the device is generating airflow before the oxygen supply is turned on. Always turn

off the oxygen supply before stopping the airflow from the device.

This device should not be used in the vicinity of a flammable anaesthetic mixture in combination with

oxygen or air and nitrous oxide.

The airflow for breathing generated by this device may be as much as 7°C (12.6°F) higher than the

room temperature. This device should not be used if the room temperature is warmer than 35°C (95°F)

to prevent the airflow temperature from exceeding 40°C (104°F) and causing irritation to your airway.

If this device overheats, it will stop operating and show message "Error 002" on the display. After

cooling down to the proper temperature, the device can be restarted.

This machine should be used only with masks (and connectors) recommended by the manufacturer,

or by your doctor or respiratory therapist. A mask should not be used unless the CPAP machine is

turned on and operating properly. The vent holes for the mask should never be blocked, to allow for

proper exhaling. If the vent hole is blocked, the CPAP machine will stop and show message "Error 002".

After the machine cools down, please re-connect the power cord to reset the machine.

At low CPAP pressure, some exhaled gas may remain in the mask and be breathed in again.

CAUTION –

Make sure the area around the machine is dry and clean. Dust and foreign particles may affect the

treatment. Keep the air inlet on the back of the machine clear to prevent overheating and damage of

the device. Do not place the machine near a source of hot or cold air. An extremely cold or hot

environment may damage the user's respiratory airway.

If there is a possibility of electro-magnetic interference with mobile phones, please increase the

distance between devices or turn off the mobile phone.

Do not connect the device to the personal computer for data downloading during the treatment. This

may cause a failure in the CPAP system.

To prevent from potential allergic reactions to mask used in the device, This machine shall be used

only with masks (and connectors) recommended by the manufacturer.

U.S. Federal law restricts this device to sale by or on the order of a licensed doctor.